|
Remote Operated Hydraulic/Magnetic Circuit Breaker
C-Series
C-Series PDF eLibrary
The C-Series remote operated circuit breaker consists of a custom designed remote operated motor module (housed within a circuit breaker molding) coupled to a C-Series hydraulic/magnetic circuit breaker. The remote operated circuit breaker (ROCB) offers the convenience of remote ON, OFF, and Reset capability combined with the safety and accuracy of a standard magnetic current sensing device. This allows operation of the circuit breaker from various locations in a system, facility or site without sacrificing the ability to manually operate the breaker if required. Service, diagnostics, load shedding and power distribution control functions can now be performed in areas that were previously unattended, inaccessible.
The ROCB module can be mounted on either side of the host breaker, while occupying only the width of a standard C-Series pole. Several interface methods are available.
| Series PDF eLibrary |
 c_series_remote_operated_module.pdf
circuit_breaker_accessories.pdf |
| Certifications |
UL Recognized, CSA, UL489, TUV, UL 1500 |
| Number of Poles |
1-3 poles |
| Available Delays |
Instant, Ultra-Short, Short, Medium, Long (motor loads), AC,DC, AC/DC; High Inrush - Short, Medium, Long |
| Maximum Current and Voltage Ratings |
UL Listed:
0.10-100A @ 80VDC
0.10-60A @ 125VDC
0.10-70A @ 120VAC
0.10-30A @ 240VAC
UL Recognized:
0.02-30A @ 480WYE/277VAC 2 pole 1 phase,
3 pole 3 phase
0.02-50A @ 277VAC
0.02-70A @ 250VAC, 80VDC
0.02-100A @ 120/240VAC, 65VDC |
| Maximum Interrupting Capacity |
UL Listed:
10,000A @ 120VAC, 80VDC
5,000A @ 240VAC, 125VDC
UL Recognized:
7,500A @ 80VDC
3,000A @ 125/250VAC (UL only)
5,000A @ 250VAC w/fuse back up
5,000A @ 480WYE/277VAC w/fuse back up |
| Auxiliary Switch Ratings |
10.1A @ 250VAC
0.1A @ 125VAC (gold contacts)
5A @ 30VDC |
| Available Circuits |
Series, Shunt, Relay, Switch Only, Series Mid-Trip w/ Alarm Switch, Series w/Remote Shutdown, Relay and Shunt Trip Dual Coil |
| Actuator Style |
Handle (1 per pole) |
| Terminal Options |
.250 Double QC Tabs
10-32 Threaded Stud
10-32 Screw
10-32 Screw with Washer and Saddle Clamp
1/4-20 Threaded Stud
M5 Threaded Stud
M6 Threaded Stud
Push in Stud Terminals |
| Mounting Method |
Front Panel |
| Interface Options |
Flying Leads
Integral Connector
Flying Lead with 4 Pin Dual Row Connector |
| Remote Operator Input |
12 VDC, 20-40VDC, 41-80VDC |
| Value Added |
Custom actuator colors
Non-standard amp ratings
Variety of Lead lengths
Din Rail construction available, consult factory
and more | |
