|
Hydraulic/Magnetic Circuit Breaker
E-Series
E-Series PDF eLibrary
The E-Series hydraulic/magnetic circuit breakers are ideally suited for higher current and voltage applications. They offer front and back mounting, screw terminals, stud terminals and heavy duty box wire connectors for solid wire or a pressure plate connector for standard wire. A Power Selector device is also available.
E-Series is UL listed and CSA certified for branch circuit protection which does not require a fuse back up. It is also UL recognized and CSA certified as a supplementary protector and as a manual motor controller. These circuit breakers are available with handle actuators, 1- 6 poles, .1-100 amps, up to 600VAC or 125VDC, with choice of time delays and actuator colors.
| Series PDF eLibrary |
 e_series_circuit_breakers.pdf
e_series_time_delay_values.pdf
circuit_breaker_accessories.pdf |
| Certifications |
UL recognized, UL Listed, CSA, VDE |
| Number of Poles |
1-6 poles |
| Available Delays |
Instant, Short, Medium, Long (motor loads), Hi-Inrush, AC or DC |
| Maximum Current and Voltage Ratings |
UL Listed:
.10-100A @ 240VAC, 125VDC
UL Recognized:
0.02-100A @ 277VAC, 125VDC, 1 pole
0.02-100A @ 600VAC, 2 pole 1 phase, 3 pole 3 phase |
| Maximum Interrupting Capacity |
5,000A @ 125VDC
5,000A @ 277VAC
10,000A @ 600VAC w/fuse back up |
| Auxiliary Switch Ratings |
10.1A @ 250VAC
0.1A @ 125VAC (gold contacts)
5A @ 30VDC |
| Available Circuits |
Series, Shunt, Relay, Switch Only, Series w/Remote Shutdown |
| Actuator Style |
Handle (1 per pole) |
| Terminal Options |
10-32 Studs
10-32 Screw
1/4-20 Studs
1/4-20 Screw
Box Wire Connector
Box Wire Connector w/pressure plate
Combinations of above for line/load requirements |
| Mounting Method |
Rear Mounted or Front Panel Mounted |
| Value Added |
Custom actuator colors
Non-standard current ratings | |
